Turbo vs Trax vs Spark: Which BlueCarve CNC Is Right for You?

Short answer: choose the Turbo if you want the most accurate router for signs, furniture parts, 3D carving and small production runs up to 1300 x 1300mm. Choose the Full Sheet Trax if you need to cut whole 2400 x 1200mm sheets for cabinetry, van fit-outs or construction. Choose the Spark Plasma if you cut steel, stainless or aluminium sheet.

BlueCarve Turbo vs Trax vs Spark at a glance

Turbo Full Sheet Trax Spark Plasma
Type CNC router CNC router CNC plasma table
Starting price (inc. GST) $3,990 $4,990 $4,490 (plasma cutter extra)
Cutting area 800 x 800mm to 1300 x 1300mm 1270 x 2470mm or 1270 x 2770mm 1270 x 770mm to 1570 x 3070mm
Drive 16mm ball screw 20mm helical rack and pinion Helical rack and pinion
Typical accuracy Up to 0.1mm Up to 0.3mm Plasma kerf dependent
Height clearance 105mm 105mm 120mm with knife bed
Max spindle 2.2kW air or water cooled 2.2kW air cooled Thermacut 40SD to 125HD plasma
Controller FluidNC with 7″ touch screen FluidNC (ESP32) MyPlasm with torch height control
Maintenance Low: grease ball screws and rails Low: grease rails, check pinion arms Low: keep clean, check consumables
Laser add-on 7.5W or 10W diode 7.5W or 10W diode No
Best for Hobbyists, prototyping, small business, small production Full sheet work, cabinetry, van fit-outs, stage and construction Metal signs, brackets, fire pits, fabrication, motorsport

Which BlueCarve should I buy?

Is the Turbo or the Trax better for a home workshop?

The Turbo suits most home and small-business workshops. Its 1 x 1m base model fits on a bench, and the ball-screw drive gives the best accuracy in the range, up to 0.1mm. Choose the Trax only if you regularly need to cut full 2400 x 1200mm sheets and have the floor space for a 1.5 x 3m machine.

What is the difference between ball screw and rack and pinion?

A ball screw, used on the Turbo, turns a threaded shaft to move the gantry, giving very little backlash and the highest accuracy over shorter lengths. Rack and pinion, used on the Trax and Spark, drives a gear along a toothed rail. It stays accurate over long lengths like a 3m full sheet, with slightly more backlash than a ball screw. Both are a step up from the belt-and-wheel drives used on many entry-level CNC kits.

Can a BlueCarve router cut aluminium?

Yes. Both routers cut timber, plastics, composites and soft metals like aluminium. For regular aluminium work, add a spindle (1.5kW or 2.2kW) and the upgraded Z axis, which uses larger rail blocks and ball screw for a stiffer, cleaner cut.

Should I get a CNC router or a plasma table?

Get a router to cut timber, MDF, plywood, acrylic and aluminium, or to carve 3D reliefs and engrave. Get a plasma table to cut steel, stainless or aluminium sheet profiles, from signs and gates to brackets and fire pits. A diode laser can be added to either router for engraving, but a router cannot cut steel.

How much does a BlueCarve cost all up?

Turbo: $3,990 for 1×1, $4,490 for 1.5×1 landscape or portrait, $4,990 for 1.5×1.5. Add a Makita RT0700 trimmer (not supplied) or a 1.5kW spindle from $770, plus a base board and waste board.

Trax: from $4,990 for the 1.5 x 3m full sheet. Add a trimmer or spindle and build or buy a table.

Spark Plasma: $4,490 (1270 x 770mm), $4,990 (half sheet), $5,490 (full sheet) or $5,990 (1570 x 3070mm). Add a Thermacut plasma cutter from $2,495, table legs from $1,500 and a water tray from $500.

Freight is quoted at cost through four transport brokers, from about $250 to a commercial address with a forklift. Pick-up from Laverton North is free and includes a full walkthrough.

Can I upgrade later?

Spindles, lasers, Z axis upgrades, beds, clamps and probes can all be added later. The one thing you can’t change after purchase is the machine size, so buy the size you expect to grow into.

What all three have in common

  • Designed, built and tested in Melbourne, not imported flat-pack kits
  • Closed-loop stepper motors that don’t lose position under load
  • 12mm aluminium side plates and 15mm linear rails
  • Auto-squaring proximity homing
  • Australian-approved power supplies
  • Direct support from the maker by phone, message or email, plus the BlueCarve owners community on Facebook

Weighing up an imported machine? Read Australian made vs imported CNC: the real cost.

Still stuck? Ring me on 0448 431 833 and tell me what you want to make. I’ll tell you which one fits, even if it’s the cheaper one. There’s more detail in the FAQ, and real projects in the gallery.

0
0
Quote Request
Your cart is emptyReturn to Shop